Wine Cellar Climate Control Melbourne, Cellars melbourne
         

Fondis

Fondis is a quality manufacturer and supply several climate control systems from 550w up to 2500w and in differing configurations from “slide in” wall mounted models, to integrated and larger split systems. These models are fully imported from France and carry a 2 year guarantee. Fondis have just released two new models which are the quietest on the market and have many new features.

We provide a description of the various configurations below:

Fondis “Slide in” systems: These simply slide into a hole in the wall between your cellar and a well ventilated area behind, which means that much of the unit is hidden in the wall. They plug into a standard power point, and are very easy to install.

Fondis Integrated systems: These models are designed to be effective in a situation where a climate control system cannot be placed through the wall. Cooling air is passed through the unit via a pipe, and this makes them particularly suitable where the cellar is internal in the dwelling or perhaps below ground.

Fondis Split systems: This model is only available in larger a larger size, and are supplied in two parts, each connected by pipes in a similar way to standard split systems. They are designed for large underground or internal cellars where there is difficulty with the disposal of heat.

Fondis Integrated Cellar Door: The Fondis PC15 is an attractive insulated door which carries a small built in cooling system. It is designed for cellars up to 15 Cubic metres, and one of the features is that it re-evaporates its own condensate. This is the answer in a situation where the cellar is internal. Simply remove your door and replace it with this one.

Fondis Humidifier: In locations where humidity is reasonable high, Fondis units will, if properly installed in a correctly insulated cellar, maintain acceptable humidity levels. The Fondis Humidifier is a small unit designed to boost humidity in dry areas.

The following table will explain the features of the Fondis Range:



Model Capacity (Cu M) Configuration Heating function Comments
C25S 25 Slide in No Requires hole in wall 515 X 375
C25SR 25 Slide in Yes Requires hole in wall 515 X 375
C50SR 50 Slide in Yes Requires hole in wall 545 X 375
C25IN 25 Integrated Yes 125mm air pipe for air supply
C50IN 50 Integrated Yes 150mm air pipe for air supply
SP100 100 Split System Yes Max separation of units 8 metres
PC15 15 Integrated Door No Re-evaporated own condensate



Fondis C25
(new model)

Fondis C25IN
(new model)

Fondis C50S
fond
Fondis C50IN

Fondis PC15

Fondis SP100
For pricing information please call on 03 9775-5544 or use our “Contact Us” form.

A note on climate control: Insulation for your cellar is essential for the operation of your cellar within well understood climatic conditions for the orderly development of complexities in your wine. The above estimates of capacity are a guide only and are based on a standard cellar which is insulated up to cool room standards and where the ambient temperature air source is within limitations.

Cellar climate control is a complicated subject – please call our experts on 03 9775 5544 for further advice before making your choice of a Fondis climate control system.
<- Back    


 Home | About Us | Why Collect and Store Wine? | 

Interested in Building a Cellar?   |  Our Products | LinksContact Us | Site Map - SEO Australia by The Click Factory

Search Engine Optimisation / SEO by The Click Factory